For those who predominantly sharpen narrow blades, we offer a narrow-blade honing guide consisting of the narrow-blade clamping head, the standard roller base and the angle registration jig. It clamps blades from 1/8″ to 1-1/2″ wide using parallel jaws to ensure blades stay square to the jig. Whether they have bevelled or square edges, blades are kept centered and tight to the reference face of the jig by the canted jaws. It accepts beveledged chisels up to 15/32″ thick and square-edged chisels up to 11/32″ thick, and hones bevel angles from 15° to 40° and back bevels from 10° to 20°.
The narrow-blade head clamps blades from the sides with parallel jaws to ensure they stay square to the jig. The jaws are also canted to keep blades centered and tight to the reference face of the jig, whether they have bevelled or square edges – it will even hold chisels that are triangular in cross section. It accepts blades from 1/8″ to 1-1/2″ wide, holding bevel-edged chisels up to 15/32″ thick and square-edged blades up to 11/32″ thick. It hones bevel angles from 15° to 40° and back bevels from 10° to 20°.
The interchangeable rollers attach to the clamping heads with a single thumbscrew. The eccentric axle mount lets you add a micro-bevel to any angle setting with a simple turn of a knob. The straight roller hones straight edges. At 2″ wide, it provides a stable base for even the narrowest of blades. The barrel-shaped camber roller lets you rock the guide slightly to hone a slight curve or camber into a blade edge, eliminating blade tracks when planing.
Offering an impressive range of angle settings, the integral blade angle registration jig squares the blade and sets the bevel angle in one easy step. A scale and sighting mark help center blades when using the standard head; the narrow-blade head is self-centering. Once the blade is clamped, the jig slides off the guide.